Siemens FS20 - Power Supply (150 W)

Commissioning security module (firewall) FN2009
-
A1
Entering network settings
23
98 | 188
Building Technologies
009052_s_en_
--
Fire Safety
2016
-
06
-
02
23.3 Entering network settings
ϖ The network topology is known.
ϖ 'Advanced Mode' is selected.
κ Enter the network settings in the following order:
– External IP address 'IP Address ext.'
– Routing mode 'Routing Mode'
– Router network data 'Router'
– Load the network settings to FN2009-A1.
Entering external IP address, 'IP Address ext.'
1. Double-click on the field below the 'IP Address ext.' designation.
 The external IP address for the FN2009-A1 can be edited.
2. Enter the following IP address: 10.169.29.80.
Entering routing mode, 'Routing Mode'
The following settings apply for the planned network access to
↑
GAP with
activated DHCP server.
'192.168.201.X' must be changed accordingly for network access to the standby
router or with IP address details.
ϖ 'Module 1' is highlighted in the 'View' window.
1. Press <F4> on the keyboard or open the 'Edit' > 'Properties' menu.
 The 'Module Properties' window is displayed: