Siemens FS20 - Selecting Type and Entering MAC Address

Commissioning security module (firewall) FN2009
-
A1
Selecting type and entering MAC address
23
97 |
188
Building Technologies
009052_s_en_
--
Fire Safety
2016
-
06
-
02
23.2 Selecting type and entering MAC address
The corresponding MAC address can be found on the front of
the FN2009
-
A1.
The FN2009-A1 is type S612V2.
Preparation
ϖ The PC is connected to FN2009-A1.
ϖ 'Security Configuration Tool' is started.
1. Create a new project using the 'Project' > 'New' menu and enter the
administrative project data, 'User name' and 'Password'.
2. Save the new project.
3. Select 'View' > 'Advanced Mode'.
 More entry masks for required settings can be viewed.
Selecting type
1. Highlight the field below the 'Type' designation.
 The button for the dropdown list field is displayed.
2. Select 'S612V2'.
 Type is selected.
Entering MAC address
ϖ The MAC address is known.
1. Double-click on the field below the 'MAC Address' designation.
 The MAC address can be edited.
2. Enter the MAC address for the FN2009-A1.
 MAC address is entered.