Siemens FS20 - Installing Security Configuration Tool

Commissioning security module (firewall) FN2009
-
A1
Insta
lling Security Configuration Tool
23
96 | 188
Building Technologies
009052_s_en_
--
Fire Safety
2016
-
06
-
02
23.1 Installing Security Configuration Tool
The 'Security Configuration Tool' software is included in the scope of supply for
the FN2009-A1.
κ Install the 'Security Configuration Tool' software.
 The software is installed in the standard path 'SIMATIC' > 'SCALANCE' >
'Security' > 'Security Configuration Tool'.
 FN2009-A1 can be configured.
The FN2009
-
A1 is displayed as S612V2 in the Security Configuration Tool.