1
9 |
Building Technologies
1 About this document
Goal and purpose
This document provides information and work steps for installing, commissioning,
maintaining and repairing the fire detection system FS20. More information can be
found in the corresponding documents under 'Applicable documents'.
To understand this document, you must have complete knowledge of document
008836. See chapter 'Applicable documents'.
Scope
The information contained in this document is valid for market package MP6.
Target groups
The information in this document is intended for the following target groups:
Target group Activity Qualification
Installation personnel
● Assembles and installs the
product components at the
place of installation.
● Carries out a function check
following installation.
● Has received specialist training in the
area of building installation technology
or electrical installations.
Commissioning personnel
● Configure the product at the
place of installation according
to customer-specific
requirements.
● Check the product operability
and release the product for use
by the operator.
● Searches for and corrects
malfunctions.
● Has obtained suitable specialist training
for the function and for the products.
● Has attended the training courses for
commissioning personnel.
Maintenance personnel
● Carries out all maintenance
work.
● Checks that the products are in
perfect working order.
● Searches for and corrects
malfunctions.
● Has obtained suitable specialist training
for the function and for the products.
Source language and reference document
● The source/original language of this document is German (de).
● The reference version of this document is the international version in English.
The international version is not localized.
Document identification
The document ID is structured as follows:
ID code Examples
ID_ModificationIndex_Language_COUNTRY
-- = multilingual or international
A6V10215123_a_de_DE
A6V10215123_a_en_--
A6V10315123_a_--_--
To Next Page
Loading...
