Siemens FS20 - 25 Commissioning the Sounder Base FDSB291

Commissioning the sounder base FDSB291
25
111 |
188
Building Technologies
009052_s_en_
--
Fire Safety
2016
-
06
-
02
25 Commissioning the sounder base FDSB291
If the product version of the sounder base FDSB291 or of the fire detector in the
sounder base FDSB291 is <30, then the 'Base sounder' element is not
automatically created when the FDnet devices are read in. If this is the case, then
you must create the 'Base sounder' element manually.
You will find more information in document 009078. See chapter 'Applicable
documents'.
You will find the product version (ES) on the type plate of the device.
Figure 4: Type label of the sounder base
Figure 5: Type label of the fire detector
ES
ES