Siemens FS20 - MIMIC Display Driver FT2001-A1

Updating the firmware
Updating the FW of the peripheral devices
29
144 | 188
Building Technologies
009052_s_en_
--
Fire Safety
2016
-
06
-
02
29.8.4 Mimic display driver FT2001-A1
WARNING
Incorrect assignment between detector/detector zone and customer text
Misleading messages in the event of an alarm
●
Never change
the wiring during the firmware update.
The firmware must be updated individually for each mimic display driver.
Preparation
ϖ The mimic display driver is fed by a 24 V external power supply or by the FDnet
detector line.
ϖ The driver for the MCL-USB adapter FDUZ221 or FDUZ227 is installed on the
PC.
1. Select 'File' > 'Import new resource package'.
2. In the selection window, open an F-FXS2001-XX_x_x_...zip file matching the
↑ 'Site'.
3. Connect the PC to the device via the MCL-USB adapter.
Figure 10: Connection of the PC to the mimic display driver
FDUZ221 /
FDUZ227
MCL-USB adapter (interface USB/MC-LINK)
X2 Connection for the MCL-USB adapter
FT2010 Mimic display driver
FT2001-A1
X2
MC-Link
FDUZ221/FDUZ227
USB