7 — Routine Maintenance
124
920515770_J
Vision® 1300 Series
Operator Manual
2. If Instrument Washing option IS NOT present: Go to Step 3.
– or –
If Instrument Washing option IS present:
a. Press Open/Close door on load side touch screen to open load door.
b. When chamber door is open, roll empty Vision CW Instrument Washing Manifolded Rack into wash
chamber, inserting right wheels in the most rightward guiding rail.
1 Guiding Rail
.
c. Insert rack water inlet into chamber manifold connector. Gently push on rack until water inlet clicks into
position.
To Next Page
Loading...
