Link the instrument to your Connect account
This section describes using your Connect account when you use the instrument for the first time.
The first time you use your Connect account on an instrument, you will be prompted to create a four-
digit numerical PIN. This PIN is to use when signing in to the instrument with your Connect account.
It will apply to all other instruments when you use your Connect account. This does not change the
password when signing in to your Connect account on a browser.
After the PIN is set up on the instrument, it must be changed with your Connect account on a browser
(see “Change the PIN for a Connect profile” on page 133).
The first time the instrument is used with a Connect account, a region must be selected.
For a detailed description of the profile, see “If you link when you are not signed in to the instrument” on
page 130.
1.
In the Sign In screen, tap Get started4Connect.
2.
(Optional) Select the appropriate region.
Option Description
China For users in China
U.S. For users in any country other than China
3.
T
ap a connection option.
Option Action
Mobile
devices
Note: Befor
e selecting this option, install and sign in to the Connect application
on your mobile device.
On the instrument:
1.
T
ap
Mobile devices.
2.
Hold the camer
a on your mobile device over the QR code that is displayed
on the touchscreen.
3.
Tap Close.
PC A link code is displayed on the instrument.
On a comput
er:
1.
Access the Connect platform.
2.
Click Add instrument.
3.
Select QuantStudio.
4.
Enter the link code.
Instrument Enter your Connect account information, then tap Link account.
4.
(Optional) In the Ent
er PIN screen, tap the PIN (4 digits required) field, enter a four-digit numerical
PIN, then tap Enter.
Tap the Show PIN checkbox to show or hide the PIN.
Chapter 8 Manage pr
ofiles
Link the instrument to your Connect account
8
126
QuantStudio
™
6 Pro Real-Time PCR System and QuantStudio
™
7 Pro Real-Time PCR System User Guide
To Next Page
Loading...
