Thermo Scientific Applied Biosystems QuantStudio 7 Pro - Apply the reagents to a plate; Delete the reagent details

3.
Tap a row in the table, then enter the information.
•
Reagent name
•
Reagent type
•
Lot number
•
SKU (Part number)
•
Expiration date
4.
T
ap Save reagent.
5.
Tap Done.
Apply the reagents to a plate
Add the reagents before they are applied to a plate (see “Add or edit the reagent details for a plate” on
page 66).
1.
In the Plat
e tab, tap one of the following items.
•
A single well
•
Multiple wells
•
(Select all)
2.
T
ap the Sample Information pane, then tap Reagents.
Note: If no wells are selected, the pane is labeled Legend.
3.
T
ap a row in the table to apply it to the plate.
4.
Tap Done.
Delete the reagent details
1.
In the Plat
e tab, tap one of the following items.
•
A single well
•
Multiple wells
•
(Select all)
2.
Tap the Sample Information pane, then tap Reagents.
Note: If no wells are selected, the pane is labeled Legend.
3.
(Optional) T
ap Clear all.
Chapter 4 Edit a plat
e before starting a run
Options to edit the well details of a plate file
4
QuantStudio
™
6 Pro Real-Time PCR System and QuantStudio
™
7 Pro Real-Time PCR System User Guide
67