Thermo Scientific Applied Biosystems QuantStudio 7 Pro - Pause an instrument run; Stop an instrument run

Pause an instrument run
Pause a run to add reagents to the plate or to edit the number of cycles.
1.
In the home screen during a run, tap (Actions).
See Figure 10 on page 71.
2.
Tap Pause run, then enter a pause temperature.
3.
(Optional) Tap Edit to change the number of cycles.
4.
(Optional) Tap
(Eject) t
o open the drawer, then tap
(Eject) t
o close the drawer.
CAUTION! PHY
SICAL INJURY HAZARD. During instrument operation, the plate temperature
can reach 100°C. If you want to access the plate during a run pause, enter room temperature as
the pause temperature and allow the plate to cool to room temperature before handling.
Stop an instrument run
CAUTION! PHY
SICAL INJURY HAZARD. During instrument operation, the plate temperature can
reach 100°C. If you want to access the plate during a run pause, enter room temperature as the
pause temperature and allow the plate to cool to room temperature before handling.
1.
In the home scr
een during a run, tap
(Actions).
See Figur
e 10 on page 71.
2.
Tap Stop run.
3.
Unload the plate (see “Unload a plate or a TaqMan
™
Array Card from the instrument” on page 52).
Chapter 5 Options for a run
P
ause an instrument run
5
72
QuantStudio
™
6 Pro Real-Time PCR System and QuantStudio
™
7 Pro Real-Time PCR System User Guide