Thermo Scientific Applied Biosystems QuantStudio 7 Pro - Export the instrument log; View the instrument statistics

•
Run
•
Change Block
•
Error
•
Power
•
Calibration
•
Self-Test
•
Update
•
User
2.
(Optional) T
ap any of the table headings to sort by that parameter.
3.
(Optional) Tap an instrument event type in the left pane to filter the list that is displayed by that
event type.
4.
Tap Cancel.
Export the instrument log
1.
In the home scr
een, tap
(Settings)4Maint
enance and service4Instrument log.
2.
(Optional) Tap a type of instrument event to export the log for only that type of event.
If an instrument event is not selected, the logs for all the instrument events will be exported.
3.
Tap Export.
4.
Select a destination to save the instrument log files.
•
Connect
•
Network Drive
•
USB Drive
Not
e: You must be signed in with a Connect profile in order to export the instrument log to
Connect.
5.
T
ap Done.
View the instrument statistics
1.
In the home screen, tap
(Settings)4Maint
enance and service4Instrument statistics.
The Instrument Statistics screen is displayed.
•
Disk Space Remaining (MB)
•
Block Cycle Count
•
Block Degree Climbed
•
LED Usage (hours)
•
RNase P Status
•
Block Serial Number
•
Heated Cover Serial Number
•
Block Type
2.
T
ap Cancel.
Chapter 11 Configur
e the instrument settings
Configure maintenance and service settings
11
QuantStudio
™
6 Pro Real-Time PCR System and QuantStudio
™
7 Pro Real-Time PCR System User Guide
179