Thermo Scientific Applied Biosystems QuantStudio 7 Pro - Security, Auditing, and E-signature (SAE) v2.0 module functions

Security, Auditing, and E‑signature (SAE) v2.0 module
functions
Functions that are controlled
The following functions are controlled, depending on the user role:
•
Plate setup, including the following functions:
–
Create a new template
–
Edit the run method
–
Edit the analysis settings
–
Define, edit, or delete the targets or the assays
–
Assign the target or the assay
–
Define, edit, or delete the sample
–
Assign the samples
–
Define, edit, or delete the reagents
–
Assign the reagents
•
Add and delete a custom dye
•
Start and stop an instrument run
•
Calibration runs and RNase P verification runs
•
Instrument configuration, including the following functions:
–
Software update
–
Network configuration
–
Instrument name change
–
Date and time change
–
SAE module setting modification
–
Sleep setting modification
–
Instrument access modification
–
Disk management setting modification
–
Instrument back-up and restore a back-up
•
Log into timed out sessions
•
Perform e-signatures
Chapter 9 Use the instrument with the Security, Auditing, and E‑signature (SAE) v2.0 module
Security, Auditing, and E‑signature (SAE) v2.0 module functions
9
138
QuantStudio
™
6 Pro Real-Time PCR System and QuantStudio
™
7 Pro Real-Time PCR System User Guide