Prepare the instrument to store, move, or ship
Remove the block and heated cover to store, move, or ship the instrument.
It is recommended to store the block and heated cover in the provided protective box when they are not
installed on an instrument.
Ship the instrument and the block and heated cover separately.
1.
In the home screen, tap (Settings)4Maintenance and service4Ship prep mode4Next.
The Ship Prep Mode screen is displayed.
2.
In the Ship Prep Mode screen, tap Next.
3.
Follow the instructions on the touchscreen to remove the block and heated cover.
The instrument is now ready to store, move, or ship.
Move the instrument
CAUTION! PHY
SICAL INJURY HAZARD. Do not attempt to lift the instrument or any other heavy
objects unless you have received related training. Incorrect lifting can cause painful and sometimes
permanent back injury. Use proper lifting techniques when lifting or moving the instrument. At least
two people are required to lift it.
IMPORTANT! Moving your instrument can cr
eate subtle changes in the alignment of the instrument
optics. Recalibrate the instrument if necessary.
•
Ensure that the surface on which you place the instrument can support at least 35.85 kg (79 lbs.).
•
Ensure that the path to transport the instrument is clear of obstructions.
•
At least two people are needed to lift and carry the instrument.
•
Keep your spine in a good neutral position.
•
Bend at the knees and lift with your legs.
•
Do not lift an object and twist your torso at the same time.
•
Coordinate your intentions with your assistant before lifting and carrying.
IMPORTANT! Aft
er moving the instrument, perform an RNase P instrument verification run. If the run
fails, perform ROI/ uniformity, background, and dye calibrations.
Chapter 10 Maintain the instrument
Power on or o, store, and move
10
QuantStudio
™
6 Pro Real-Time PCR System and QuantStudio
™
7 Pro Real-Time PCR System User Guide
165
To Next Page
Loading...
