Thermo Scientific Applied Biosystems QuantStudio 7 Pro - APPENDIX B Connect the instrument to a network; Connect the computer to the instrument directly or to a LAN

Connect the instrument to a network
■
Connect the computer to the instrument directly or to a LAN .............................. 193
■
Connect the instrument to a wired network ............................................. 194
■
Connect the instrument to a wireless network ........................................... 195
■
Instrument and computer connections ................................................. 196
■
Download and install the desktop software ............................................. 197
■
Networking ......................................................................... 198
Connect the computer to the instrument directly or to a
LAN
This section describes direct wired connection of the computer provided by Thermo Fisher Scientific to
the instrument or to a LAN.
Do not connect a customer-provided computer to the instrument.
1.
Connect an Ethernet cable from the instrument or a LAN to the computer.
2.
Power on the computer, then log in using a Windows
™
Administrator account.
3.
In the Windows
™
desktop, right-click My Network Places4Properties.
4.
Right-click Local Area Connection, then select Properties.
5.
Select Internet Protocol (TCP/IP)4Properties.
B
QuantStudio
™
6 Pro Real-Time PCR System and QuantStudio
™
7 Pro Real-Time PCR System User Guide
193