Thermo Scientific Applied Biosystems QuantStudio 7 Pro - If you link when you are not signed in to the instrument

(continued)
Phase Steps that occur
If your Connect account is
unlinked:
•
Your local instrument profile (UserABC) is displayed in the home screen of the
instrument.
•
Plate files and data files that were saved under your Connect instrument profile
are accessible under your local instrument profile.
•
Plate files and data files are saved under local instrument profile and can be
copied to Connect (see “Copy plate files” on page 77 and “Transfer data files at a
later time” on page 81).
•
Your local instrument profile name (UserABC) is available for selection in the Sign
In screen.
If you link when you are not signed in to the instrument
In this scenario, your local instrument profile name is created automatically at the time that you link. The
same user name is used for your local instrument profile and your Connect profile. Plates and results
are accessible when you sign in with either profile.
If you link to Connect when you are not signed in to the instrument:
Phase Steps that occur
Before you link:
•
In the Sign In screen, you tap Get Started4Connect.
When you link:
•
You link your profile (see “Link the instrument to your Connect account” on
page 126).
•
If this is the first time you link, a Connect instrument and a local instrument
profile (with standard role) are created with the same name using the
FirstNameLastInitial of the user name from your thermofisher.com account.
Example: User1@thermofisher.com First name is User, Last name is Gray.
Connect account username is User G.
•
Your local instrument profile (User G.) is linked to your Connect account
(User1@thermofisher.com).
•
Your Connect instrument profile (User G.) replaces your local instrument profile.
After you link:
•
Your Connect instrument profile (User G.) and is displayed in the home screen
of the instrument.
•
Plate files and data files from your local instrument profile can be transferred to
Connect.
•
New plate files and data files are saved under your Connect instrument profile.
•
Your Connect instrument profile name (User G. ) is available for selection in the
Sign In screen.
Chapter 8 Manage profiles
If you link when you are not signed in to the instrument
8
130
QuantStudio
™
6 Pro Real-Time PCR System and QuantStudio
™
7 Pro Real-Time PCR System User Guide