Thermo Scientific Applied Biosystems QuantStudio 7 Pro - Connect the instrument to a wireless network

5.
Tap Done.
The Network Connections screen is displayed. The Status and IP Address fields under the Wired
option have the information from the selected wired network.
6.
Tap Done.
This instrument is now connected to the selected wired network.
Connect the instrument to a wireless network
1.
In the home screen, tap
(Settings)4Instrument settings4Network configur
ation.
The Network Connections screen is displayed.
2.
Tap Edit.
3.
Tap one of the active fields found under the Wireless option.
4.
Select a wireless network to connect to the instrument.
5.
(Optional) Tap Refresh to prompt the instrument to search for available wireless networks.
6.
Tap Done.
The Network Connections screen is displayed. The Status, Network, and IP Address fields under
the Wireless option are filled with the information from the selected wireless network.
7.
Tap Done.
This instrument is now connected to the selected wireless network.
Appendix B Connect the instrument t
o a network
Connect the instrument to a wireless network
B
QuantStudio
™
6 Pro Real-Time PCR System and QuantStudio
™
7 Pro Real-Time PCR System User Guide
195