Create and run plates on the
instrument
■
Options to run a plate ................................................................. 47
■
Overview of customized data export .................................................... 50
■
(Optional) Scan a barcode using a barcode scanner ...................................... 51
■
Load a plate into the instrument ........................................................ 51
■
Load a TaqMan
™
Array Card into the instrument ......................................... 52
■
Unload a plate or a TaqMan
™
Array Card from the instrument .............................. 52
Options to run a plate
Create and run a plate from a system template or a saved plate file
A system template is a plate file that is pre-loaded on the instrument and not editable. It can be edited
and saved as a new custom plate file.
Plate files can be edited in Connect or the desktop software.
The Run Queue folder contains plate files sent to the instrument from the desktop software.
1.
In the home screen, tap one of the following options:
•
(Load plate file)
•
Set up run
2.
Tap the location of the system template or the plate file in the left column.
•
Run Queue
•
Public
•
My Instrument
Not
e: My instrument is not available if you are using the instrument as a guest. You must be
signed in.
•
Templates
•
Connect
Not
e: You must be signed in with a Connect profile.
•
Network Drive
3
QuantStudio
™
6 Pro Real-Time PCR System and QuantStudio
™
7 Pro Real-Time PCR System User Guide
47
To Next Page
Loading...
