Thermo Scientific Applied Biosystems QuantStudio 7 Pro - Add or edit the reagent details for a TaqMan Array Card; Apply the reagents to a TaqMan Array Card; Edit a passive reference dye

4.
Tap a row in the table, then delete the information in each field.
•
Reagent name
•
Reagent type
•
Lot number
•
SKU (Part number)
•
Expiration date
•
Quencher dye
5.
T
ap Save reagent.
6.
Tap Done.
Add or edit the reagent details for a TaqMan
™
Arr
ay Card
1.
In the Plate tab, tap a port.
See Figure 9 on page 65.
2.
Tap the Legend pane, then tap Reagents.
3.
Tap a row in the table.
4.
Tap Add new, then enter the information.
•
Reagent name
•
Reagent type
•
L
ot number
•
SKU (Part number)
•
Expiration date
5.
T
ap Save reagent, then tap Done.
Apply the reagents to a TaqMan
™
Array Card
Add the reagents before they are applied to a plate (see “Add or edit the reagent details for a TaqMan
™
Array Card” on page 68).
A reagent can only be applied by port. It cannot be applied by individual well.
1.
In the Plate tab, tap a port.
See Figure 9 on page 65.
2.
Tap the Legend pane, then tap Reagents.
3.
Tap a row in the table to apply it to the port.
4.
Tap Done.
Edit a passive reference dye
A passive reference dye normalizes the fluor
escent reporter signal in real-time PCR.
1.
In the Plate tab, tap Actions4Edit passive reference dye.
The Passive Reference Dye screen is displayed.
2.
Select the passive reference dye.
Chapter 4 Edit a plat
e before starting a run
Options to edit the well details of a plate file
4
68
QuantStudio
™
6 Pro Real-Time PCR System and QuantStudio
™
7 Pro Real-Time PCR System User Guide