Life Technologies Holdings Pte Ltd | Block 33 | Marsiling Industrial Estate Road 3 | #07-06, Singapore 739256
For descriptions of symbols on product labels or product documents, go to thermofisher.com/symbols-definition.
The information in this guide is subject to change without notice.
DISCLAIMER: T
O THE EXTENT ALLOWED BY LAW, THERMO FISHER SCIENTIFIC INC. AND/OR ITS AFFILIATE(S) WILL NOT BE
LIABLE FOR SPECIAL, INCIDENTAL, INDIRECT, PUNITIVE, MULTIPLE, OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR
ARISING FROM THIS DOCUMENT, INCLUDING YOUR USE OF IT.
Revision history: Pub. No. MAN0018045
Revision Date Description
G.0 17 February 2021 v1.4.0
Updat
ed centrifuges for the TaqMan
™
Array Card.
F.0 6 November 2020 v1.4.0
•
Specified that the instrument and the desktop software must be connected to the same SAE server
for an account password to be updated on both applications.
•
Provided the option of a static IP address or a dynamic IP address to connect to the SAE server.
•
Corrected standards on 384-well RNase P plate (Figure 14 on page 105).
•
Added a TaqMan
™
Array Card block, including system template file names, calibration workflow,
instructions to edit the plate file, and instructions to load and unload from the instrument
(QuantStudio
™
7 Pro System only).
•
Added instructions to review the calibration status in the QuantStudio
™
Design and Analysis
Software v2.
•
Added a peripheral self-test and updated the previous self-verification test to a hardware test.
•
Added instructions to upload a certificate for a TaqMan
™
Array Plate with RFID.
•
Added the option of a voice recording for Smart Help.
•
Added remote support.
•
Updated the RFID labels (Figure 27 on page 215 and Figure 28 on page 216).
E.0 27 April 2020 v1.3.0
•
Added protein thermal shift experiments to the instrument functions.
•
Added a 96-well 0.1-mL block.
•
Updated instructions to export data files when setting up a run and added instructions to import or
delete export settings.
•
Updated instructions to save an edited run method.
•
Updated instructions to add or edit reagents and then to apply the reagents to the plate.
•
Updated instructions to view the amplification plot after a run.
•
Added instructions to view QC Check status after the run.
•
Added information about a locked template file.
•
Added functions for using the instrument with the SAE Administrator Console.
D.0 7 January 2020 v1.2.1
•
Added information about position to set up facial authentication and to sign in with facial
authentication.
•
Added instructions to test the connection to the Connect cloud-based platform and to view the
privacy policy for the Connect platform.
•
Added instructions to repair the software after a software update.
•
Changed port 7000 to 7443 for the instrument-to-computer connection.
•
Corrected C
t
to C
q
in description of instrument verification.
C.0 3 December 2019 v1.2.0
•
Added a 384-well plate block.
•
Updated instructions to set up facial authentication.
•
Added a new voice command for calibration.
•
Added custom melt curve run calibration.
To Next Page
Loading...
