The status dial displays Run complete when the run is finished. If the automatic sign-out feature is
enabled and the set time has elapsed, the instrument will display the Sign In screen.
1.
Tap (Eject) to open the instrument drawer, then remove the plate.
2.
Tap (Eject) t
o close the instrument drawer.
For information on plate disposal, see “Chemical safety” on page 229 and “Biological hazard safety” on
page 231.
Chapter 3 Cr
eate and run plates on the instrument
Unload a plate or a TaqMan
™
Array Card from the instrument
3
QuantStudio
™
6 Pro Real-Time PCR System and QuantStudio
™
7 Pro Real-Time PCR System User Guide
53
To Next Page
Loading...
