28
Smart Sipper
Thermo Scientific Evolution 200 Series User Guide 411
4. Press the tubing into both clamps.
5. Insert a nipple (provided) into each end of the tubing.
Related Topics
Installing the Smart Sipper
Installing a Flow Cell
Installation
Installing the Smart Sipper
It is not necessary to power off the instrument when installing or removing a Smart Accessory.
NOTICE Leave at least 2 cm of tubing extending beyond each clamp.
NOTICE Remove the tubing from the pump before storing the accessory. Leave the
instrument and accessory powered on when the pump is idle.
Open clamps
Rotate pump head
Insert tubing
Pump In
Pump Out
To Next Page
Loading...
