Thermo Scientific Evolution 201 - Page 64

2
INSIGHT Software
Operation
50 Evolution 200 Series User Guide Thermo Scientific
Accessories Tab for Scan
Accessories Tab for Scan
The status of accessories can be monitored during measurements.
Related Topics
Accessories
Setting Application Parameters
Scan
Instrument Status Monitors
Instrument Tab for Scan
Measurement Tab for Scan
Correction Tab for Scan
Samples Tab for Scan
Samples Tab for Scan
Click Settings in Scan to display the Accessories tab in
the right pane. The available parameters depend on the
installed accessories. See Accessories for details.
Click Settings in Scan to display the Samples tab in the
right pane.
Feature Description
Number of samples Number of samples in the samples table.
Increment sample name
from selected row
For creating sequentially numbered sample names in the samples
table if Number of samples (see above) is set to 2 or greater:
1. Select Increment sample name from selected row.
2. Click the cell in the Sample Name column for starting the
sequence.
3. Type a new sample name.
4. Press Enter.