EN
162
Software Module
11.18. Module Logic
11.18.1. Overview
Objective
Logically link two values to each other.
Prerequisites
1. Sensor is correctly connected (see section 5.5)
2. Connection has been established from the sensor to the software (see section
10.1.1)
3. The camera is configured / images are selected (see section 11.2)
Procedure
First of all, the values which will be linked to each other have to be identified. Fixed
values, as well as results, can be used.
11.18.2. Settings
Property
The following settings/results appear.
Process Time [ms] Sensor processing time for the module
Module State Error codes to give support in error diagnosis (see section
“18.5. weQube Software Module States” on page 198)
Output The results are displayed.
Math Function The type of mathematical function is specified:
• AND
• OR
• XORs
• NAND
• NOR
Input A Fixed value or variable event from the application
Input B Fixed value or variable event from the application
To Next Page
Loading...