EN
182
Software Module
11.25. Module Statistics
11.25.1. Overview
Objective
The application can be fine-tuned on the basis of statistical sensor data.
Prerequisites
1. Sensor is correctly connected (see section 5.5)
2. Connection has been established from the sensor to the software (see section
10.1.1)
3. The camera is configured / images are selected (see section 11.2)
Procedure
Various statistical data can be calculated and displayed. Up to 100 most recently ac-
quired values can be analyzed.
11.25.2. Settings in the Statistics Module
Property
The following settings/results appear.
Process Time [ms] Sensor processing time for the process steps
Module State Error codes to give support in error diagnosis (see section
18.5)
Channel Count Number of parameters which will be acquired for statistical
purposes
Function Field
Insertion of the statistics field
Statistical evaluations are displayed in a separate area.
Statistics window
To Next Page
Loading...