Wenglor B50 - MAC Address; Network Reset; Language

31
Smart Camera / Vision-Sensor / 1D-/2D-Code-Scanner / OCR Reader
6.8.2.3. MAC Address
MAC Address
Displaying the MAC Address
54:4a:05:00:08:04

The sensor’s unchangeable MAC address is displayed.
After pressing the  key, the display is returned to the Ethernet network menu.
6.8.2.4. Network Reset
Network reset
Resetting the Network Configuration
Press
<R>
to reset.
R
The network configuration can be reset by pressing “R”.
After pressing the  key, the display is returned to the Ethernet network menu.

Refer to section 5.6 regarding default network settings.
6.9. Language
The menu language can be changed in the “Language” menu. The user is automatically prompted to select a
language when the sensor is first started up, as well as after each reset.
Language
Selecting a menu language
O English
O Deutsch
O Français
O Español
O Italiano
 Back
 Run
The selected language appears in the menus as soon as it has been selected.