EN
74
Software Module
11.2.3.3. Auto-Focus Box
Objective
The sensor can be automatically focused to various objects. Well focused images can
be recorded as a result, which make good image processing possible.
Note: After positioning the auto-focus box, automatic focusing can be executed under
settings/results in the device camera module. The auto-focus check box must be ac-
tivated to this end.
Image Area
The auto-focus box is displayed in the image area, where it can also be adjusted.
The position and the size of the auto-focus rectangle can be varied. The area to be
focused on must be contained within one working distance. It’s advisable to select a
high-contrast area.
Property
Focus box settings can also be changed in the settings/results area.
Width Width of the readout box
Height Height of the readout box
The following settings/results are displayed under origin:
X (px)
Coordinate of the sensor image coordinate system (see section 18.3)
Y (px)
To Next Page
Loading...