EN
192
Maintenance Instructions
15. Maintenance Instructions
• This wenglor sensor is maintenance-free.
• It's advisable to clean the protective disc and to check screw joints, as well as plug connections and clamp
connectors, at regular intervals.
• Do not use any solvents or cleaning agents which might damage the sensor.
16. Proper Disposal
wenglor sensoric GmbH does not accept the return of unusable or irreparable products. Respectively valid
national waste disposal regulations apply to product disposal.
17. Exclusion of Liability
wenglor sensoric GmbH, hereinafter referred to as wenglor, makes explicit reference to the fact that the infor-
mation contained in these operating instructions may be subject to continuous further development and techni-
cal changes. The operating instructions do not imply any guarantee from wenglor with regard to the described
technical procedures or specific product characteristics. wenglor assumes no liability for printing errors or other
inaccuracies contained in these operating instructions, unless wenglor was verifiably aware of such errors at
the point in time at which the operating instructions were prepared. Furthermore, wenglor herewith explicitly
informs the user that these operating instructions are only a general description of technical procedures whose
implementation may not be suitable in all cases as described in this document.
Information included in these operating instructions is subject to change without notice. No part of this docu-
ment may be duplicated or translated into any other languages, regardless of the utilized means, without prior
written consent from wenglor sensoric GmbH.
wenglor sensoric GmbH
www.wenglor.com
To Next Page
Loading...