55
Smart Camera / Vision-Sensor / 1D-/2D-Code-Scanner / OCR Reader
Search the Network
See section “10.1.1. Connecting the Sensor (Connect to Device)” on
page 40
File Manager
See section “10.1.1.3. The File Manager” on page 43
Characteristics
See section 10.1.1.4
Log Viewer
Window with the sensor’s system messages
Project Tools
Toolbar for the entire project
Module Toolbar
Module-specific toolbar
10.2.2.5. Help
Information Version information
Operating
instructions
A solution to a specific problem can be searched for in the operating instructions.
A PDF file reader is required to this end.
Licenses Overview of current licenses for the software and the connected sensor
Firmware update The firmware update procedure is started. A sensor must be connected.
10.2.2.6. User Mode
Only visible modules appear in the function tree. Modules which will not be
edited can be hidden (see section “10.2.3.1. Navigation Area, Settings/Results,
Function Field” on page 56).
Note: Module visibility can only be changed in the advanced mode.
All modules and settings can be edited in the navigator.
10.2.2.7. Closing the Project
The currently open project is closed.
To Next Page
Loading...