EN
228
Appendix
29604 Sample identifier does not contain color information
29605 Sample identifier does not contain texture information
29606 Sample image does not contain enough information
29607 Sample identifier does not contain unprepared data (use add_sample_identifier_prepara-
tion_data)
29608 Sample identifier has not been prepared yet (use prepare_sample_identifier)
29609 Sample identifier does not contain untrained data (use add_sample_identifier_training_
data)
29610 Sample identifier has not been trained yet (use train_sample_identifier)
29611 Sample identifier does not contain result data
29612 Sample identifier must contain at least two training objects (use add_sample_identifier_
training_data)
30000 no error
30001 Input invalid
30002 Input negative
30003 Input exceeded range
30004 Memory exceeded boundary
30004 Memory allocation failure
30006 Memory pointer null
30007 DMA failure
30008 File open failure
30009 File read failure
30010 File write failure
30011 File close failure
30012 File format failure
30013 Warning low memory
40000 No error occurred in camera device.
40001 Initialization of image chip driver failed.
40002 Converting image to RGB or HSV failed.
40003 The capture process timed out.
40004 Arming video driver failed -> driver is in error state.
40005 Setting up image chip failed while changing size.
40006 Setting up video driver failed while changing size.
40007 Setting up image chip failed while changing brightness.
40008 Setting light mode failed -> typically UART communication.
40009 Setting focus pos. failed -> typically UART communication.
40010 Auto focus process failed -> typically UART communication.
50001 Indicates the configuration is invalid.
50002 Indicates the configuration API was not initialized.
50003 Indicates the configuration API was already initialized.
50004 Indicates that a function argument was invalid.
50005 Indicates a channel was defined twice.
50006 One has tried to define more than 2 quadrature channels.
50007 Indicates that more than 1 TRIGGER inputs is defined.
50008 Indicates that more than 1 READY signal is defined.
50009 Indicates that more than 1 FLASH output is defined.
50010 Indicates that more than 1 PROCESS output is defined.
50011 Indicates that more than 1 CAPTURE output is defined.
50012 Indicates that more than 1 PROJECT_SELECT feedback output defined.
50013 Indicates that more than 1 PROJECT_SELECT intput is defined.
50014 Indicates invalid configuration of timer/quadrature.
50015 Indicates PRU couldn't started.
To Next Page
Loading...