P1086708-001 ZXP Series 9 Card Printer Service Manual 121
Maintenance
Cleaning the Laminator
Cleaning the Laminator
The regular use of cleaning cards will clean and maintain important parts of your laminator that
cannot be reached.
Printer usage (total number of cards printed and total number of cards laminated) can be found
on the printer Properties, Device Information tab, or via the OCP Info Menu (see “Printer Menu
Information” on page 48).
When to Clean
y Cleaning should occur every 5,000 cards.
y Heated Roller cleaning should occur every 20,000 cards.
Laminator
Note • To avoid a long wait while the card transport rollers cool to 60°C, perform cleaning
before the rollers heat (i.e., when rst turned on and the rollers are still cold).
Important • Do not reuse cleaning cards.
To initiate the cleaning process:
Step 1. On the operator control panel (OCP) select Menu.
Step 2. From the Main Menu select Advanced Settings.
Step 3. From the Advanced Settings menu select Clean Printer.
To Clean the Card Path:
Step 1. Select Clean Lam Card Path to run the laminator cleaning routine.
Step 2. Use the laminator cleaning card in the laminator cleaning kit.
Step 3. Follow the OCP instructions.
Step 4. When complete, the OCP will return to the Clean Printer Menu.
To Next Page
Loading...
Need help?
General
