Zebra ZXP 9 Series User Manual

348 ZXP Series 9 Card Printer Service Manual P1086708-001
Replacement Procedures for the Laminator
Removal Sequence (continued)
Removal Sequence (continued)
Laminator
Controller
PCBA
(Page 368)
Cassette Latch
Assembly (Top &
Bottom)
(Page 378)
Top
Thermopile
Cable
(Page 390)
Bottom
Thermopile
Cable
(Page 391)
Laminate Ribbon
Rollers (Top &
Bottom)
(Page 400)
Thermopiles
(Top &
Bottom)
(Page 386)
Card Laminator
Sensor Cable
Assembly
(Page 402)
Card Exit
Sensor Cable
Assembly
(Page 403)
Cutters
(Upper &
Lower)
(Page 396)
Flexible Ribbed
Rollers (Left &
Right)
(Page 392)
Platen Overrun
Roller (Top &
Bottom)
(Page 394)
Card Staging
Nip Rollers
(Left & Right)
(Page 393)
Static Brush
(Page 377)
Previous Page

Zebra ZXP 9 Series Specifications

General

Resolution	300 dpi
Card Capacity Output	100 cards
Memory	64 MB
Interface	USB, Ethernet
Operating Humidity	20% to 80% non-condensing
Print Technology	Dye Sublimation
Print Speed YMCK	Up to 190 cards/hour
Card Capacity Input	100 cards
Card Sizes	CR-80 ISO 7810
Connectivity	USB, Ethernet
Operating System	Windows, Linux
Options	Magnetic stripe encoding
Power Requirements	100-240V AC, 50/60Hz
Operating Temperature	15°C to 35°C
Card Thickness	10-40 mil