Zebra ZXP 9 Series

296 ZXP Series 9 Card Printer Service Manual P1086708-001
Replacement Procedures for the Printer
Procedures: Door Switch Cable Assembly
Door Switch Cable Assembly
For replacement, use Kit C/A Door Switch 105936G-026. Contact Zebra Customer Service at
+01 877-275-9327 for ordering information.
Step 1. With a TORX T6 driver, remove the screw (circled below) holding the door switch in
place.
Step 2. Unplug P6 from J6.
Step 3. Remove the door switch cable assembly.