Zebra ZXP 9 Series User Manual

79 ZXP Series 9 Card Printer Service Manual P1086708-001
4
Operation
Introduction
Printing with the ZXP Series 9 Card Printer is similar to printing with any other printer in a Windows
environment:
y The printer is connected to either a host computer (via USB), or to a network (via Ethernet).
y The printer is selected by either the operating system or the appropriate software application.
y Printing preferences are set via the printer driver control panel, although the factory default
values will be appropriate for many applications (see “Printing Preferences” on page 53).

Zebra ZXP 9 Series Specifications

General

Resolution	300 dpi
Card Capacity Output	100 cards
Memory	64 MB
Interface	USB, Ethernet
Operating Humidity	20% to 80% non-condensing
Print Technology	Dye Sublimation
Print Speed YMCK	Up to 190 cards/hour
Card Capacity Input	100 cards
Card Sizes	CR-80 ISO 7810
Connectivity	USB, Ethernet
Operating System	Windows, Linux
Options	Magnetic stripe encoding
Power Requirements	100-240V AC, 50/60Hz
Operating Temperature	15°C to 35°C
Card Thickness	10-40 mil