Zebra ZXP 9 Series User Manual

68 ZXP Series 9 Card Printer Service Manual P1086708-001
Software
Printer Conguration
Printer Properties
Card Printer Properties can be used to view the printer rmware/driver/hardware conguration and
installed media, to access advanced settings via the ZXP Toolbox, and to set features such as
security, ports, and color management.
The following tabs are included in the Printer Properties Control Panel:
y General Tab
y Sharing Tab
y Ports Tab
y Advanced Tab
y Color Management Tab
y Security Tab
y Device Information Tab
The OK button applies the settings and closes the Printing Preferences Control Panel.
The Cancel button closes the Printing Preferences Control Panel without applying the changes
made.
The Apply button makes (or applies) the changes. The Printing Preferences Control panel remains
open.
The Help button shows this help content.
To open the Printer Properties Control Panel:
y Windows 7: Select Start > Devices and Printers, right click the Zebra ZXP Series 9 Card
Printer, and select Printer Properties from the pop-up menu.
y Windows 8: Right-click the screen’s bottom-left corner (or press Windows+I) and choose
Control Panel from the pop-up menu, right click the Zebra ZXP Series 9 Card Printer, and
select Printer Properties from the pop-up menu.
y Windows 10: Select the Start menu and then select Settings > Devices, right click the Zebra
ZXP Series 9 Card Printer, and select Printer Properties from the pop-up menu.

Zebra ZXP 9 Series Specifications

General

Resolution	300 dpi
Card Capacity Output	100 cards
Memory	64 MB
Interface	USB, Ethernet
Operating Humidity	20% to 80% non-condensing
Print Technology	Dye Sublimation
Print Speed YMCK	Up to 190 cards/hour
Card Capacity Input	100 cards
Card Sizes	CR-80 ISO 7810
Connectivity	USB, Ethernet
Operating System	Windows, Linux
Options	Magnetic stripe encoding
Power Requirements	100-240V AC, 50/60Hz
Operating Temperature	15°C to 35°C
Card Thickness	10-40 mil