Zebra ZXP 9 Series User Manual

P1086708-001 ZXP Series 9 Card Printer Service Manual 33
Software
Installing the Software
Installing the USB Printer Driver
To install the Ethernet driver, “Installing the Ethernet Printer Driver” on page 40.
Step 1. If not already done, connect power to the printer. Turn power OFF (O).
Step 2. Connect the USB cable to the printer and the appropriate port on the host computer.
Step 3. Insert the User CD into host computer; the Main Menu will open.
Step 4. From the Main Menu, click Install the Printer Driver.

Zebra ZXP 9 Series Specifications

General

Resolution	300 dpi
Card Capacity Output	100 cards
Memory	64 MB
Interface	USB, Ethernet
Operating Humidity	20% to 80% non-condensing
Print Technology	Dye Sublimation
Print Speed YMCK	Up to 190 cards/hour
Card Capacity Input	100 cards
Card Sizes	CR-80 ISO 7810
Connectivity	USB, Ethernet
Operating System	Windows, Linux
Options	Magnetic stripe encoding
Power Requirements	100-240V AC, 50/60Hz
Operating Temperature	15°C to 35°C
Card Thickness	10-40 mil