Zebra ZXP 9 Series

414 ZXP Series 9 Card Printer Service Manual P1086708-001
Replacement Procedures for the Laminator
Procedures: Door Latch
Door Latch
Note • This procedure uses Spares Kit # 105936G-529: KIT, ASSY, ZXP8 LAM DOOR LATCH.
Step 1. Locate the door latch mounted on the base (viewed from the bottom with the
baseplate removed.).
Step 2. With a TORX T10 driver, remove the two screws (circled below) holding the door
latch to the base.
Step 3. Remove the door latch.