Zebra ZXP 9 Series User Manual

417 ZXP Series 9 Card Printer Service Manual P1086708-001
14
Magnetic Card Encoder
Introduction
The magnetic encoder can be set for either high or low coercivity, which must match the cards being
used. Use the Printing Preferences Control Panel to change the encoder setting.

Zebra ZXP 9 Series Specifications

General

Resolution	300 dpi
Card Capacity Output	100 cards
Memory	64 MB
Interface	USB, Ethernet
Operating Humidity	20% to 80% non-condensing
Print Technology	Dye Sublimation
Print Speed YMCK	Up to 190 cards/hour
Card Capacity Input	100 cards
Card Sizes	CR-80 ISO 7810
Connectivity	USB, Ethernet
Operating System	Windows, Linux
Options	Magnetic stripe encoding
Power Requirements	100-240V AC, 50/60Hz
Operating Temperature	15°C to 35°C
Card Thickness	10-40 mil