Zebra ZXP 9 Series User Manual

P1086708-001 ZXP Series 9 Card Printer Service Manual 223
ZXP Toolbox
Security
To change the Password:
Step 1. Enter your password in the Old password eld.
Step 2. Enter the new password in the New password and the Conrm password elds. Click
on the Update Password button.
Security Roles
Important • To access this section of the ZXP Toolbox, you must be the administrator of the computer
or have administrative privileges.
Security Roles
Use this section to grant and restrict access to various ZXP Series Toolbox screens. The list of users
in the drop-down menu is derived from the list of users on the system.
To set security access roles:
Step 1. Select a user from the drop-down menu.
Step 2. Use the arrow buttons (>, >>, <, and <<) to make specic features available to or
restrict specic features from the selected user role. Click Save.
At the next log in, the user will only see or have access to the features previously granted.

Zebra ZXP 9 Series Specifications

General

Resolution	300 dpi
Card Capacity Output	100 cards
Memory	64 MB
Interface	USB, Ethernet
Operating Humidity	20% to 80% non-condensing
Print Technology	Dye Sublimation
Print Speed YMCK	Up to 190 cards/hour
Card Capacity Input	100 cards
Card Sizes	CR-80 ISO 7810
Connectivity	USB, Ethernet
Operating System	Windows, Linux
Options	Magnetic stripe encoding
Power Requirements	100-240V AC, 50/60Hz
Operating Temperature	15°C to 35°C
Card Thickness	10-40 mil