Zebra ZXP 9 Series User Manual

181 ZXP Series 9 Card Printer Service Manual P1086708-001
11
ZXP Toolbox
Introduction
Important • The ZXP Series 9 Toolbox is intended only to be used by advanced users and system
administrators.
The Toolbox is an advanced set-up and conguration utility for Zebra Card printers. This printer utility
enables users to view, set-up, and congure all aspects of their ZXP Card printer independently of
the typical Windows driver conguration screens. With the Toolbox, users can see all relevant data
for the printer, such as: media in use, network conguration, options installed, and overall printer
usage. Toolbox features give users the ability to set and customize printer settings for optimal print
quality and performance to insure the best print experience possible.
The Toolbox also enables advanced users—such as IT administrators or service technicians—to
access key technical data and adjustments to help quickly install, troubleshoot, and service printers
on site. Additionally, with the Toolbox unique printer security settings can be congured based on
desired or required levels of printer and data security.

Zebra ZXP 9 Series Specifications

General

Resolution	300 dpi
Card Capacity Output	100 cards
Memory	64 MB
Interface	USB, Ethernet
Operating Humidity	20% to 80% non-condensing
Print Technology	Dye Sublimation
Print Speed YMCK	Up to 190 cards/hour
Card Capacity Input	100 cards
Card Sizes	CR-80 ISO 7810
Connectivity	USB, Ethernet
Operating System	Windows, Linux
Options	Magnetic stripe encoding
Power Requirements	100-240V AC, 50/60Hz
Operating Temperature	15°C to 35°C
Card Thickness	10-40 mil