Zebra ZXP 9 Series User Manual

78 ZXP Series 9 Card Printer Service Manual P1086708-001
Software
Printer Conguration
Device Information Tab
The Device Information tab provides device
information, security status, and printer usage.
Access to Media Info and ZXP Toolbox is
included.
The Media Info button takes you to the Media
Info screen.
The ZXP Toolbox button launches the ZXP
Toolbox application which provides advanced
conguration capabilities and tools to manage
the operation of the printer.
Media Info
The Media Info screen displays the status of the
media installed in the printer.
The Ribbon status bar displays the ribbon type
installed and the number of images remaining.
The Transfer lm status bar displays the transfer
lm type installed and the number of images
remaining.
The Top laminate status bar displays the
top laminate type and the number of images
remaining (if the printer is equipped with a
laminator).
The Bottom laminate status bar displays
the bottom laminate type and the number of
images remaining (if the printer is equipped
with a double-sided laminator).

Zebra ZXP 9 Series Specifications

General

Resolution	300 dpi
Card Capacity Output	100 cards
Memory	64 MB
Interface	USB, Ethernet
Operating Humidity	20% to 80% non-condensing
Print Technology	Dye Sublimation
Print Speed YMCK	Up to 190 cards/hour
Card Capacity Input	100 cards
Card Sizes	CR-80 ISO 7810
Connectivity	USB, Ethernet
Operating System	Windows, Linux
Options	Magnetic stripe encoding
Power Requirements	100-240V AC, 50/60Hz
Operating Temperature	15°C to 35°C
Card Thickness	10-40 mil