Zebra ZXP 9 Series User Manual

178 ZXP Series 9 Card Printer Service Manual P1086708-001
Accessing a Network Printer via a Web Browser
Procedure
Step 13. The Laminator screen displays information relevant to the laminator; such as the
current status and the length of time the laminator has been used (odometer). Note
that this information is only displayed if a laminator is present.
Step 14. The IP Route Table screen is used to determine where data packets traveling over an
Internet Protocol (IP) network will be directed.

Zebra ZXP 9 Series Specifications

General

Resolution	300 dpi
Card Capacity Output	100 cards
Memory	64 MB
Interface	USB, Ethernet
Operating Humidity	20% to 80% non-condensing
Print Technology	Dye Sublimation
Print Speed YMCK	Up to 190 cards/hour
Card Capacity Input	100 cards
Card Sizes	CR-80 ISO 7810
Connectivity	USB, Ethernet
Operating System	Windows, Linux
Options	Magnetic stripe encoding
Power Requirements	100-240V AC, 50/60Hz
Operating Temperature	15°C to 35°C
Card Thickness	10-40 mil