P1086708-001 ZXP Series 9 Card Printer Service Manual 187
ZXP Toolbox
Dashboard
Sensors
Entry blocked – Shows the state of the laminator entry sensor. The state changes depending on
whether a card is blocking the sensor or not.
Staging blocked – Shows the state of the laminator staging sensor. The state changes depending on
whether a card is blocking the sensor or not.
Exit blocked – Shows the state of the laminator exit sensor. The state changes depending on
whether a card is blocking the sensor or not.
Door open – Shows the state of the laminator door sensor. The state changes depending on whether
the laminator door is open or closed.
Top laminate A/D – Shows the values coming from the top laminate detect sensor.
Bottom laminate A/D – Shows the valuees coming from the bottom laminate detect sensor.
Top transfer temp – Shows the current temperature of the top laminator roller.
Bottom transfer temp – Shows the current temperature of the bottom laminator roller.
Odometer
Total up time – Shows the total amount of time, in days, that the laminator has been on, whether
laminate has been installed or not.
Top bulb on time – Shows the total amount of time, in days, that the top laminator bulb has been on.
Bottom bulb on time – Shows the total amount of time, in days, that the bottom laminator bulb has
been on.
Cards processed – Shows the total number of cards that have passed through the laminator,
whether laminate has been installed or not.
Cards laminated – Shows the total number of cards that have been laminated.
To Next Page
Loading...