Zebra ZXP 9 Series User Manual

200 ZXP Series 9 Card Printer Service Manual P1086708-001
ZXP Toolbox
Encoding Settings
Click on Set PIN to set a security code for the card. Click on Write Raw Data to write “raw data” to a
card.
Click Get ATR to return the ATR (Answer To Reset) result from the card reader. This is useful to
identifying the type of smart card inserted into the printer.
Click Eject Card to eject the card.
The Messages area displays the output in hex format if the “Output as hex format” box is checked.

Zebra ZXP 9 Series Specifications

General

Resolution	300 dpi
Card Capacity Output	100 cards
Memory	64 MB
Interface	USB, Ethernet
Operating Humidity	20% to 80% non-condensing
Print Technology	Dye Sublimation
Print Speed YMCK	Up to 190 cards/hour
Card Capacity Input	100 cards
Card Sizes	CR-80 ISO 7810
Connectivity	USB, Ethernet
Operating System	Windows, Linux
Options	Magnetic stripe encoding
Power Requirements	100-240V AC, 50/60Hz
Operating Temperature	15°C to 35°C
Card Thickness	10-40 mil