Zebra ZXP 9 Series User Manual

210 ZXP Series 9 Card Printer Service Manual P1086708-001
ZXP Toolbox
Tools & Utilities
Clean – Click to run the cleaning procedure for the side card path; follow the on-screen instructions.
Front Card Path
Cards since last cleaning – Displays the number of cards printed since the front card path was last
cleaned.
Cleaning interval – Enables changing the number of cards interval between cleanings.
Clean – Click to run the cleaning procedure for the front card path; follow the on-screen instructions.
Heater Rollers
Cards since last cleaning – Displays the number of cards printed since the heated rollers were last
cleaned.
Cleaning interval – Enables changing the number of cards interval between cleanings.
Clean – Click to run the cleaning procedure for the heated rollers; follow the on-screen instructions.
Restore Defaults – sets the cleaning intervals back to factory default values.
Save Settings – Applies the changed values so they can be used in the future.

Zebra ZXP 9 Series Specifications

General

Resolution	300 dpi
Card Capacity Output	100 cards
Memory	64 MB
Interface	USB, Ethernet
Operating Humidity	20% to 80% non-condensing
Print Technology	Dye Sublimation
Print Speed YMCK	Up to 190 cards/hour
Card Capacity Input	100 cards
Card Sizes	CR-80 ISO 7810
Connectivity	USB, Ethernet
Operating System	Windows, Linux
Options	Magnetic stripe encoding
Power Requirements	100-240V AC, 50/60Hz
Operating Temperature	15°C to 35°C
Card Thickness	10-40 mil