Zebra ZXP 9 Series User Manual

84 ZXP Series 9 Card Printer Service Manual P1086708-001
Operation
Manual Card Feed
Step 5. Insert a single card into the slot in the correct orientation. Do not feed more than one
card at a time.
Caution • DO NOT bend cards, and refrain from touching print surfaces as much as
possible as this can reduce print quality. The surface of the cards must remain clean and
dust free. Always store cards in an enclosed container. Ideally, use cards as soon as
possible.
Step 6. The printer will feed in the card and start printing.
Step 7. Once the printing job is complete, the card is ejected from the printer into the output
hopper.

Zebra ZXP 9 Series Specifications

General

Resolution	300 dpi
Card Capacity Output	100 cards
Memory	64 MB
Interface	USB, Ethernet
Operating Humidity	20% to 80% non-condensing
Print Technology	Dye Sublimation
Print Speed YMCK	Up to 190 cards/hour
Card Capacity Input	100 cards
Card Sizes	CR-80 ISO 7810
Connectivity	USB, Ethernet
Operating System	Windows, Linux
Options	Magnetic stripe encoding
Power Requirements	100-240V AC, 50/60Hz
Operating Temperature	15°C to 35°C
Card Thickness	10-40 mil