Chapter 9 Wireless LAN Profiles
ZyWALL Series CLI Reference Guide
82
band {2.4G |5G} band-mode
{bg | bgn | a | ac | an | bgnax |
anacax}
Sets the radio band (2.4 GHz or 5 GHz) and band mode for
this profile. Band mode details:
For 2.4 GHz, bg lets IEEE 802.11b and IEEE 802.11g clients
associate with the AP.
For 2.4 GHz, bgn lets IEEE 802.11b, IEEE 802.11g, and IEEE
802.11n clients associate with the AP.
For 2.4 GHz, bgnax lets IEEE 802.11b, IEEE 802.11g, IEEE
802.11n, and IEEE802.11ax clients associate with the AP.
For 5 GHz, a lets only IEEE 802.11a clients associate with the
AP.
For 5 GHz, ac lets IEEE 802.11a, IEEE 802.11n, and IEEE 802.11ac
clients associate with the AP.
For 5 GHz, an lets IEEE 802.11a and IEEE 802.11n clients
associate with the AP.
For 5 GHz, anacax lets IEEE 802.11a, IEEE 802.11n, IEEE
802.11ac, and IEEE802.11ax clients associate with the AP.
beacon-interval <40..1000>
Sets the beacon interval for this profile.
When a wirelessly networked device sends a beacon, it
includes with it a beacon interval. This specifies the time
period before the device sends the beacon again. The
interval tells receiving devices on the network how long they
can wait in low-power mode before waking up to handle the
beacon. This value can be set from 40ms to 1000ms. A high
value helps save current consumption of the access point.
The default is 100.
[no] block-ack
Makes block-ack active or inactive. Use the no parameter
to disable it.
bss-color <0~63>
Sets the BSS color of the AP, which distinguishes it from other
nearby APs when they transmit over the same channel. Set it
to 0 to automatically assign a BSS color.
[no] disable-bss-color
Disables BSS coloring.
Use the
no command to enable BSS coloring.
ch-width wlan_htcw
Sets the channel width for this profile.
country-code country_code
Sets the country where the Zyxel Device is located/installed.
The available channels vary depending on the country you
selected. Be sure to select the correct/same country for both
radios on an AP and all connected APs, in order to prevent
roaming failure and interference to other systems.
country_code: 2-letter country-codes, such as TW, DE, or FR.
Table 21 Command Summary: Radio Profile (continued)
COMMAND DESCRIPTION
To Next Page
Loading...
