ABB REG670 - Settings

Name Type Default Description
IN6 BOOLEAN 0 Input 6 status
IN7 BOOLEAN 0 Input 7 status
IN8 BOOLEAN 0 Input 8 status
IN9 BOOLEAN 0 Input 9 status
IN10 BOOLEAN 0 Input 10 status
IN11 BOOLEAN 0 Input 11 status
IN12 BOOLEAN 0 Input 12 status
IN13 BOOLEAN 0 Input 13 status
IN14 BOOLEAN 0 Input 14 status
IN15 BOOLEAN 0 Input 15 status
IN16 BOOLEAN 0 Input 16 status
18.3.4.4 Settings
The function does not have any parameters available in the local HMI or PCM600.
18.3.4.5 Monitored data
Table 726: SPGAPC Monitored data
Name
Type Values (Range) Unit Description
OUT GROUP
SIGNAL
- - Output status
Table 727: SP16GAPC Monitored data
Name
Type Values (Range) Unit Description
OUT1 GROUP
SIGNAL
- - Output 1 status
OUT2 GROUP
SIGNAL
- - Output 2 status
OUT3 GROUP
SIGNAL
- - Output 3 status
OUT4 GROUP
SIGNAL
- - Output 4 status
OUT5 GROUP
SIGNAL
- - Output 5 status
OUT6 GROUP
SIGNAL
- - Output 6 status
OUT7 GROUP
SIGNAL
- - Output 7 status
OUT8 GROUP
SIGNAL
- - Output 8 status
OUT9 GROUP
SIGNAL
- - Output 9 status
Table continues on next page
Section 18 1MRK502052-UEN B
Station communication
996
Technical manual