ABB REG670 - Coupling Capacitor Unit REX061

Table 945: HMI keys on the front of the injection unit REX060
Key Function
The Injection switch enables injection at rotor and stator 2 s
after switching on. A LED indicates that the injection switch
is set to enable injection. The injection switch can be
padlocked in off position in order to cut-off both injection
signals.
The Key-lock button enables/disables the keypad.
Hold the Key-lock button for a period of 1.2 s to 4 s to lock or
unlock the keys. A key-lock LED indicates when the keypad
is unlocked.
• Moves the cursor in the direction of the arrows
• When the cursor is in the value change state, pressing
the up button increases the value and pressing the
down button decreases the value.
Pressing the clear button cancels changes that have not
been stored.
Pressing the enter button stores the changed value. If the
value is outside range, the limit value is stored.
22.1.1.3 Coupling capacitor unit REX061
X1
X2
IEC11000019-2-en.vsd
IEC11000019 V1 EN
Figure 564: Coupling capacitor unit REX061
1MRK502052-UEN B Section 22
Injection equipment hardware
1223
Technical manual