ABB REG670 - Authority Management AUTHMAN

20.2 Authority management AUTHMAN
20.2.1 Identification
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Authority management AUTHMAN - -
20.2.2 AUTHMAN
This function enables/disables the maintenance menu. It also controls the
maintenance menu log on time out.
20.2.3 Settings
Table 829: AUTHMAN Non group settings (basic)
Name Values (Range) Unit Step Default Description
MaintMenuDisAuth Disable
Enable
- - Enable In maintenance menu, disable authority
selection is shown
AuthTimeout 600 - 3600 s 600 600 Authority blocking timeout
20.3 FTP access with password FTPACCS
20.3.1 Identification
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
FTP access with SSL FTPACCS - -
20.3.2 FTP access with TLS, FTPACCS
The FTP Client defaults to the best possible security mode when trying to negotiate
with TLS.
The automatic negotiation mode acts on configured port number 21 and server
features, it tries to negotiate with explicit TLS via AUTH TLS. If the specified port is
any other, it tries to negotiate in a similar way.
Using FTP without TLS encryption gives the FTP client reduced capabilities. This
mode is only for accessing disturbance recorder data from the IED.
1MRK502052-UEN B Section 20
Basic IED functions
1095
Technical manual