ABB REG670 - Settings

16.9.6 Settings
Table 707: L4UFCNT Group settings (basic)
Name
Values (Range) Unit Step Default Description
Operation Off
On
- - Off Operation Off / On
CountType Positive edge
Negative edge
Both edges
-
- Positive edge Select counting on positive and/or
negative flanks
CounterLimit1 1 - 65535 - 1 100 Value of the first limit
CounterLimit2 1 - 65535 - 1 200 Value of the second limit
CounterLimit3 1 - 65535 - 1 300 Value of the third limit
CounterLimit4 1 - 65535 - 1 400 Value of the fourth limit
MaxValue 1 - 65535 - 1 500 Maximum count value
OnMaxValue Stop
Rollover Steady
Rollover Pulsed
-
- Stop Select if counter stops or rolls over after
reaching maxValue with steady or pulsed
overflow flag
InitialValue
0 - 65535 - 1 0 Initial count value after reset of the
function
16.9.7 Monitored data
Table 708: L4UFCNT Monitored data
Name
Type Values (Range) Unit Description
VALUE INTEGER - - Counted value
16.9.8 Technical data
Table 709: L4UFCNTtechnical data
Function
Range or value Accuracy
Counter value 0-65535 -
Max. count up speed 30 pulses/s (50% duty cycle) -
Section 16 1MRK502052-UEN B
Monitoring
980
Technical manual